Bourns PRS14R Rotary Plastic Shaft Dual-Potentiometers

Bourns PRS14R 14mm Rotary Plastic Shaft Dual-Potentiometers offer a small form factor and dual-potentiometer output. The potentiometers include a flatted plastic shaft with either a horizontal or vertical orientation and an optional center tap. The THT mounting type devices operate in a -10°C to +70°C temperature range with a 0.05W power rating and 5kΩ to 500kΩ standard resistance range. The PRS14R components are designed for use in professional audio and lighting applications, low/medium risk medical and laboratory equipment, industrial automation and control, and other applications where a reliable potentiometer is required.

Features

  • Dual potentiometer
  • THT mounting type
  • Flatted plastic shaft
  • Audio and linear tapers
  • Horizontal or vertical orientation option
  • Optional center tap
  • PC pin layout for board mount
  • 1x flat washer and 1x hex nut supplied with thread bushing versions
  • RoHS compliant

Applications

  • Professional audio equipment
  • Professional lighting consoles
  • Consumer white goods
  • Low/medium risk medical and diagnostic equipment
  • Test and measurement equipment
  • Communications equipment
  • Laboratory equipment
  • Industrial automation controls

Specifications

  • 5kΩ to 500kΩ standard resistance range
  • ±20% standard resistance tolerance
  • 0.6% maximum residual resistance
  • 100MΩ minimum insulation resistance at 250VDC
  • 300VAC minimum dielectric withstanding voltage at sea level
  • 100Ω tap residual resistance
  • 0.05W power rating
  • 50VAC maximum operating voltage
  • 100mV maximum sliding noise
  • 15,000 minimum rotational life cycles
  • Temperature ranges
    • -10°C to +70°C operating
    • -30°C to +70°C storage
  • Soldering conditions
    • +260°c for 5 seconds wave soldering
    • +350°C for 3 seconds manual soldering
  • 300°±5° maximum mechanical angle
  • Torque
    • 30gf-cm to 200gf-cm for starting and running
    • 30gf-cm to 300gf-cm for detent
    • 10kgf-cm maximum for mounting
    • 5kgf-cm minimum for stop strength
Published: 2021-05-12 | Updated: 2022-03-11