Všechny výsledky (1.945)

Příslušenství SparkFun Thermocouple Type-K Glass Braid Insulate

Příslušenství SparkFun This is a stainless steel Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals connecting them at the two ends and making a temperature gradient between one end and the other (a 'hot' end and a 'cold' one).

Příslušenství SparkFun PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA type antennas.

Příslušenství SparkFun Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.This is a 15ft. length of 10-wire ribbon cable. Check th

Příslušenství SparkFun These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait what's this? These cables have minor yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight

Příslušenství SparkFun These are small rare earth magnets - 0.25" cubed. Composed of Neodymium/Iron/Boron (NdFeB) these magnets are curiously strong and make for a great way to attach tools to a metal workbench hold small children to a fridge and as a trigger for reed s

Příslušenství SparkFun This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in pop-out feature that makes changing the battery easy. The feet of the holder have a small hole that allow it to be sewn without modification.

Příslušenství SparkFun This is a 1 foot long JST SH communication cable which can be cut and hacked to your needs. Ideal if you have a UAV project where the GPS module may be a distance away from the controller board. Cable has two 6-pin JST connectors with 1mm pitch. Wire

Příslušenství SparkFun Break Away Headers - Long

Příslušenství SparkFun This is a PCB mount clip to hold a 18650 Lithium Ion Cell battery. Each battery holder is sold in single units you'll need two for each battery. These work great for larger high capacity applications where a drop-in rechargable cell is needed. Thes

Příslušenství SparkFun The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80 right angle PTH pins. Add this part to your board to create a handy way to swap out micro:bits for p

Příslušenství SparkFun These are very thin variable potentiometers. By pressing down on various parts of the strip the resistance linearly changes from 100Ohms to 10 000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as