Všechny výsledky (1.921)

Antény The TOP106 from TOPGNSS is a certified GNSS/GPS surveying antenna capable of receiving the L1/L2 bands for GPS GLONASS Galileo and BeiDou constellations. These 'UFO' antennas have incredible performance for the money. The antenna has a built in gr

Šroubováky, nástrčkové klíče a nástavce This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo.

Jednodeskové počítače The micro:bit v2 Go Bundle is the quickest and most economical way to get started with the micro:bit ecosystem. While the standalone board is great for those who already have a workshop full of cables this bundle is designed for those who want to hi

Vibrační motory A vibration motor! This itty-bitty shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. The housing protects all moving parts. With a 2-3.6V operating

Moduly Zigbee – 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m

Příslušenství k anténám Many magnetic mount GPS antennas rely on being mounted on a car or other large metallic object to provide a good ground plane. But what if you want to use an antenna not on a car? The GPS Antenna Ground Plate is the solution! This plate significantly

Vývojové nástroje pro VF aplikace Looking for a low-cost way to send and receive data messages via satellite? This is it! With a clear view of the sky the Swarm M138 Satellite Transceiver allows you to send and receive short messages. It works anywhere in the world including the po

Pouzdra hlav a vodičů This is a simple 3-pin male PTH straight header. Each pin can even be broken apart if you only need one or two pins instead of all three.The pins on this header have been spaced at the 0.1" standard.

Štítky a transpondéry NFC/RFID This is a basic RFID tag that operates in accordance with the MIFARE Classic 1K specifications. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a co

Šroubováky, nástrčkové klíče a nástavce What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee

RF kabelové komplety This is a nice short U.FL to U.FL cable used to connect submodules and other RF devices to carrier boards. 50mm is length is long enough to reach but short enough to be tidy and minimize signal degradation. The 50-ohm impedance of this cable makes

USB konektory The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looking to powe