SparkFun-accessories Looking to add MIDI to your project? This is a female 5-pin right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1" making these connectors easy to prototype with. The contacts
PRT-09536
SparkFun
1:
1,81 €
32 In voorraad
Mouser-onderdeelnr.
474-PRT-09536
SparkFun
SparkFun-accessories Looking to add MIDI to your project? This is a female 5-pin right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1" making these connectors easy to prototype with. The contacts
32 In voorraad
Kopen
Min.: 1
Veelv.: 1
SparkFun-accessories Description: How could anyone improve on the clear plastic breadboard. I mean that's pretty sweet right?What if it was red?This translucent red breadboard is probably the coolest looking regular solderless breadboard there is. It has 2 power buses
PRT-11317
SparkFun
1:
4,82 €
3 In voorraad
Mouser-onderdeelnr.
474-PRT-11317
SparkFun
SparkFun-accessories Description: How could anyone improve on the clear plastic breadboard. I mean that's pretty sweet right?What if it was red?This translucent red breadboard is probably the coolest looking regular solderless breadboard there is. It has 2 power buses
3 In voorraad
Kopen
Min.: 1
Veelv.: 1
SparkFun-accessories You'll have no need for a screwdriver with this terminal! This is a 4-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm
PRT-15900
SparkFun
1:
1,51 €
9 In voorraad
Mouser-onderdeelnr.
474-PRT-15900
SparkFun
SparkFun-accessories You'll have no need for a screwdriver with this terminal! This is a 4-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm
9 In voorraad
Kopen
Min.: 1
Veelv.: 1
Details
SparkFun-accessories Needle Nose Pliers
TOL-08793
SparkFun
1:
3,10 €
83 In voorraad
Mouser-onderdeelnr.
474-TOL-08793
SparkFun
SparkFun-accessories Needle Nose Pliers
83 In voorraad
Kopen
Min.: 1
Veelv.: 1
SparkFun-accessories Chip Quik No-Clean Flux Pen - 10mL
TOL-14579
SparkFun
1:
9,50 €
78 In voorraad
Mouser-onderdeelnr.
474-TOL-14579
SparkFun
SparkFun-accessories Chip Quik No-Clean Flux Pen - 10mL
78 In voorraad
Kopen
Min.: 1
Veelv.: 1
Details
SparkFun-accessories This USB 2.0 Type-C cable is perfect for use with your Raspberry Pi 4 and other USB Type C boards. USB Type-C Connectors and Cable Assemblies offer greater PCB savings while enabling high-frequency mating in data consumer and other I/O applications
CAB-16905
SparkFun
1:
5,60 €
258 In voorraad
Mouser-onderdeelnr.
474-CAB-16905
SparkFun
SparkFun-accessories This USB 2.0 Type-C cable is perfect for use with your Raspberry Pi 4 and other USB Type C boards. USB Type-C Connectors and Cable Assemblies offer greater PCB savings while enabling high-frequency mating in data consumer and other I/O applications
258 In voorraad
Kopen
Min.: 1
Veelv.: 1
Geen
NFC/RFID-ontwikkeltools RFID Tag (125kHz)
COM-14325
SparkFun
1:
2,37 €
84 In voorraad
Mouser-onderdeelnr.
474-COM-14325
SparkFun
NFC/RFID-ontwikkeltools RFID Tag (125kHz)
84 In voorraad
Kopen
Min.: 1
Veelv.: 1
Details
Behuizingen voor single-board computing This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the cas
PRT-17867
SparkFun
1:
6,55 €
5 In voorraad
Mouser-onderdeelnr.
474-PRT-17867
SparkFun
Behuizingen voor single-board computing This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the cas
5 In voorraad
Kopen
Min.: 1
Veelv.: 1
DC-motoren These are a pair of right angle hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a ri
ROB-13258
SparkFun
1:
8,31 €
10 In voorraad
Mouser-onderdeelnr.
474-ROB-13258
SparkFun
DC-motoren These are a pair of right angle hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a ri
10 In voorraad
Kopen
Min.: 1
Veelv.: 1
RF-modules XBee RR 802.15.4 RF-modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throu
WRL-22629
SparkFun
1:
43,54 €
1 In voorraad
Mouser-onderdeelnr.
474-WRL-22629
SparkFun
RF-modules XBee RR 802.15.4 RF-modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throu
1 In voorraad
Kopen
Min.: 1
Veelv.: 1
Educatieve kits We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of
PRT-09353
SparkFun
1:
9,42 €
24 In voorraad
Mouser-onderdeelnr.
474-PRT-09353
SparkFun
Educatieve kits We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of
24 In voorraad
Kopen
Min.: 1
Veelv.: 1
NFC/RFID-tags en -transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
SEN-11319
SparkFun
1:
5,08 €
6 In voorraad
Mouser-onderdeelnr.
474-SEN-11319
SparkFun
NFC/RFID-tags en -transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
6 In voorraad
Kopen
Min.: 1
Veelv.: 1
LED-verlichting ontwikkelingstools Do not look into the light. You know you want to but boy will you be sorry. 1W per channel RGB High Power LEDs in one aluminum backed package. These LEDs will blow you away. Light them up then put a coffee cup over the LED to keep your eyes from se
COM-15200
SparkFun
1:
6,20 €
17 In voorraad
10 Verwacht 09/14/2026
Mouser-onderdeelnr.
474-COM-15200
SparkFun
LED-verlichting ontwikkelingstools Do not look into the light. You know you want to but boy will you be sorry. 1W per channel RGB High Power LEDs in one aluminum backed package. These LEDs will blow you away. Light them up then put a coffee cup over the LED to keep your eyes from se
17 In voorraad
10 Verwacht 09/14/2026
Kopen
Min.: 1
Veelv.: 1
Details
SparkFun-accessories USB Mini-B Cable 6"
CAB-13243
SparkFun
1:
2,46 €
270 In voorraad Beperkte beschikbaarheid
Mouser-onderdeelnr.
474-CAB-13243
SparkFun
SparkFun-accessories USB Mini-B Cable 6"
270 In voorraad
Kopen
Min.: 1
Veelv.: 1
Details
Magnetische schakelaars / Reedcontacten This is a small device called a reed switch. When the device is exposed to a magnetic field the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed the reeds separate and the switch opens.
COM-10601
SparkFun
1:
3,11 €
8 In voorraad
Mouser-onderdeelnr.
474-COM-10601
SparkFun
Magnetische schakelaars / Reedcontacten This is a small device called a reed switch. When the device is exposed to a magnetic field the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed the reeds separate and the switch opens.
8 In voorraad
Kopen
Min.: 1
Veelv.: 1
Inplugbare bewegings- en positiesensoren The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
SEN-09199
SparkFun
1:
14,01 €
3 In voorraad
Mouser-onderdeelnr.
474-SEN-09199
SparkFun
Inplugbare bewegings- en positiesensoren The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
3 In voorraad
Kopen
Min.: 1
Veelv.: 1
Nieuwe hulpmiddelen voor wifi-ontwikkeling - 802.111 The SparkFun Arduino UNO R4 WiFi Qwiic Kit is a great way to start with Arduino and the Qwiic-connect system. This kit includes everything you need to build a WiFi-enabled project including an Arduino UNO R4 board an assortment of Qwiic-enabled sen
KIT-22641
SparkFun
1:
109,45 €
28 In voorraad
Mouser-onderdeelnr.
474-KIT-22641
SparkFun
Nieuwe hulpmiddelen voor wifi-ontwikkeling - 802.111 The SparkFun Arduino UNO R4 WiFi Qwiic Kit is a great way to start with Arduino and the Qwiic-connect system. This kit includes everything you need to build a WiFi-enabled project including an Arduino UNO R4 board an assortment of Qwiic-enabled sen
28 In voorraad
Kopen
Min.: 1
Veelv.: 1
Details
Headers & Wire Housings This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
PRT-16581
SparkFun
1:
2,43 €
87 In voorraad
Mouser-onderdeelnr.
474-PRT-16581
SparkFun
Headers & Wire Housings This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
87 In voorraad
Kopen
Min.: 1
Veelv.: 1
Details
Behuizingen voor single-board computing The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and the micro:bit V2. These cases fe
PRT-17868
SparkFun
1:
5,40 €
8 In voorraad
Mouser-onderdeelnr.
474-PRT-17868
SparkFun
Behuizingen voor single-board computing The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and the micro:bit V2. These cases fe
8 In voorraad
Kopen
Min.: 1
Veelv.: 1
Nieuwe hulpmiddelen voor wifi-ontwikkeling - 802.111 SparkFun ESP8266 Thing Dev Board
WRL-13804
SparkFun
1:
17,42 €
4 In voorraad
Mouser-onderdeelnr.
474-WRL-13804
SparkFun
Nieuwe hulpmiddelen voor wifi-ontwikkeling - 802.111 SparkFun ESP8266 Thing Dev Board
4 In voorraad
Kopen
Min.: 1
Veelv.: 1
Details
Ontwikkelingstools antenne This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The duck style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite desirable if you re working in industrial enviro
WRL-17389
SparkFun
1:
15,09 €
5 In voorraad
Mouser-onderdeelnr.
474-WRL-17389
SparkFun
Ontwikkelingstools antenne This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The duck style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite desirable if you re working in industrial enviro
5 In voorraad
Kopen
Min.: 1
Veelv.: 1
Raspberry Pi HATs / Uitbreidingsborden Feeling fancy? Why not add a Top pHAT to your Pi pHAT stack? The SparkFun Top pHAT for Raspberry Pi is intended to be at the top of a pHAT stack so you won't find any pins for stacking on top of this board but that's ok because you will want to pre
DEV-16301
SparkFun
1:
42,95 €
84 In voorraad
Mouser-onderdeelnr.
474-DEV-16301
SparkFun
Raspberry Pi HATs / Uitbreidingsborden Feeling fancy? Why not add a Top pHAT to your Pi pHAT stack? The SparkFun Top pHAT for Raspberry Pi is intended to be at the top of a pHAT stack so you won't find any pins for stacking on top of this board but that's ok because you will want to pre
84 In voorraad
Kopen
Min.: 1
Veelv.: 1
Aansluitpunten Quick Disconnects- Female 1/4 Pk of 5
PRT-14407
SparkFun
1:
0,516 €
348 In voorraad
Mouser-onderdeelnr.
474-PRT-14407
SparkFun
Aansluitpunten Quick Disconnects- Female 1/4 Pk of 5
348 In voorraad
Kopen
Min.: 1
Veelv.: 1
Details
SparkFun-accessories The SparkFun Single Supply Logic Level Converter is logic level and power supply translator in one small package. This little board breaks out the Texas Instruments TXB0104 4-bit bi-directional voltage-level translator with automatic direction sensin
PRT-14765
SparkFun
1:
16,95 €
16 In voorraad
Mouser-onderdeelnr.
474-PRT-14765
SparkFun
SparkFun-accessories The SparkFun Single Supply Logic Level Converter is logic level and power supply translator in one small package. This little board breaks out the Texas Instruments TXB0104 4-bit bi-directional voltage-level translator with automatic direction sensin
16 In voorraad
Kopen
Min.: 1
Veelv.: 1
Geen
SparkFun-accessories Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard your own 10-key or just a custom input for your computer Cherry MX switches give you that satisfying keyboard click. Now we
PRT-15307
SparkFun
1:
0,903 €
289 In voorraad
Mouser-onderdeelnr.
474-PRT-15307
SparkFun
SparkFun-accessories Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard your own 10-key or just a custom input for your computer Cherry MX switches give you that satisfying keyboard click. Now we
289 In voorraad
Kopen
Min.: 1
Veelv.: 1
Geen