SparkFun Sensoru izstrādes rīki

Rezultāti: 140
Atlasīt Attēls Detaļas Nr.
 Raž.
Apraksts Datu lapa Pieejamība Cenas noteikšana (EUR) Atlasiet rezultātus tabulā pēc vienības cenas, pamatojoties uz daudzumu.
Daudz. RoHS Produkta tips
Produkts
Tips
Rīks ir paredzēts novērtēšanai:
SparkFun Attāluma sensoru izstrādes rīks This is the HC-SR04-33 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04-33 module includes an ultrasonic transmitter a re
Datu lapa
88Ir noliktavā
Min.: 1
Vair.: 1
Distance Sensor Development Tool Breakout Boards Ultrasonic Distance Sensor HC-SR04-33
SparkFun Spiediena sensoru izstrādes rīki This is a force sensitive resistor with a round 0.5" diameter sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower the resistance. When no pressure is b 124Ir noliktavā
Min.: 1
Vair.: 1

Pressure Sensor Development Tools
SparkFun Multifunkcionālo sensoru izstrādes rīki The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as an analog reading. ECGs can be ext 89Ir noliktavā
Min.: 1
Vair.: 1

Multiple Function Sensor Development Tools
SparkFun Temperatūras sensoru izstrādes rīki Digital Temp Sensor Breakout TMP102 622Ir noliktavā
Min.: 1
Vair.: 1

Temperature Sensor Development Tools Breakout Boards Digital Temperature Sensor TMP102
SparkFun Multifunkcionālo sensoru izstrādes rīki The SparkFun LSM6DSO 6 Degrees of Freedom Breakout is an accelerometer and gyroscope sensor with a giant 9kB FIFO buffer and embedded processing interrupt functions. Due to the capabilities and low cost of the LSM6DSO we've created this small breakou 166Ir noliktavā
Min.: 1
Vair.: 1
Multiple Function Sensor Development Tools Breakout Boards Accelerometer, Gyroscope Sensor LSM6DSO
SparkFun Attāluma sensoru izstrādes rīks The SparkFun Qwiic Mini dToF TMF8821 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical Cavity Surface Emitting Laser (VCSEL) from AMS. The dToF device is based on Single Photon Avalanch 96Ir noliktavā
Min.: 1
Vair.: 1

Distance Sensor Development Tool ToF Imagers Direct Time of Flight Sensor TMF8821
SparkFun Multifunkcionālo sensoru izstrādes rīki Capture complex environmental movement and location data without writing a single line of code! The SparkFun DataLogger IoT - 9DoF is a powerful preprogrammed data logger designed for users who need to capture a lot of data quickly and get back to 12Ir noliktavā
42Paredzamais 11/30/2026
Min.: 1
Vair.: 1

Multiple Function Sensor Development Tools Development Boards Data Acquisition ESP32-WROOM-32E, ISM330DHCX, MAX17048, MMC5983MA, WS2812-2020
SparkFun Optisko sensoru izstrādes rīki This SparkFun Qwiic Spectral UV Sensor features the AS7331 UV sensor from ams OSRAM©. It measures UV radiation on three channels: UVA (320-400nm) UVB (280-320nm) and UVC (200-280nm) with high sensitivity and accuracy. The three channels on the 11Ir noliktavā
147Pēc pasūtījuma
Min.: 1
Vair.: 1
Optical Sensor Development Tools Breakout Boards UV Light Sensor AS7331
SparkFun Multifunkcionālo sensoru izstrādes rīki Whether you are monitoring microclimates for agriculture or tracking storms from your backyard the Weather Meter Kit provides the three fundamental mechanical sensors needed to build your own custom weather station. This kit strips away the complex
Datu lapa
142Ir noliktavā
161Paredzamais 08/21/2026
Min.: 1
Vair.: 1
Nē
Multiple Function Sensor Development Tools Weather Meter Kits Rainfall, Weather, Wind Direction, Wind Speed Sensor
SparkFun Optisko sensoru izstrādes rīki Ambient Light Sensor B/O TEMT6000
Datu lapa
131Ir noliktavā
Min.: 1
Vair.: 1

Optical Sensor Development Tools
SparkFun Multifunkcionālo sensoru izstrādes rīki 16 Output I/O Expan B/O SX1509 48Ir noliktavā
58Paredzamais 09/09/2026
Min.: 1
Vair.: 1

Multiple Function Sensor Development Tools
SparkFun Temperatūras sensoru izstrādes rīki LilyPad Temperature Sensor 3Ir noliktavā
10Paredzamais 10/06/2026
Min.: 1
Vair.: 1

Temperature Sensor Development Tools
SparkFun Paātrinājuma sensoru izstrādes rīki LilyPad ACCLRM ADXL335
Datu lapa
7Ir noliktavā
Min.: 1
Vair.: 1

Acceleration Sensor Development Tools
SparkFun Optisko sensoru izstrādes rīki The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shining on it. As more light is applied o
Datu lapa
18Ir noliktavā
Min.: 1
Vair.: 1

Optical Sensor Development Tools Breakout Boards Ambient Light Sensor ALS-PT19
SparkFun Multifunkcionālo sensoru izstrādes rīki The MyoWare® 2.0 Muscle Sensor is designed to be wearable allowing you to attach biomedical sensor pads directly to the board itself. However there still may be cases where you want to mount the sensor pads away from the board; this is where th 46Ir noliktavā
Min.: 1
Vair.: 1

Multiple Function Sensor Development Tools Sensor Boards MyoWare 2.0 Cable Shield MyoWare 2.0 Muscle Sensor
SparkFun Multifunkcionālo sensoru izstrādes rīki The MyoWare 2.0 Link Shield is designed to easily connect a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller. The shield provides a 3.5mm TRS jack so that you can use a 3.5mm TRS-to-TRS cable to link the boards together. The MyoWare 2.0 Li 16Ir noliktavā
43Paredzamais 08/28/2026
Min.: 1
Vair.: 1

Multiple Function Sensor Development Tools Sensor Boards MyoWare 2.0 Link Shield MyoWare 2.0 Muscle Sensor
SparkFun Multifunkcionālo sensoru izstrādes rīki The MyoWare 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack it on your 6Ir noliktavā
Min.: 1
Vair.: 1

Multiple Function Sensor Development Tools Sensor Boards MyoWare 2.0 Arduino Shield MyoWare 2.0 Muscle Sensors, Link Shields
SparkFun Multifunkcionālo sensoru izstrādes rīki The SparkFun micro:climate kit is a full weather station kit that is built on top of the weather:bit carrier board. Unlike previous weather kits we've carried the micro:climate kit includes our tried-and-true Weather Meters and Soil Moisture Sensor 2Ir noliktavā
Min.: 1
Vair.: 1
Multiple Function Sensor Development Tools Development Kits Weather Station SEN-11050, SEN-13322
SparkFun Optisko sensoru izstrādes rīki This version of the QRE1113 breakout board features a digital output using a capacitor discharge circuit to measure the amount of reflection. This tiny board is perfect for line sensing when only digital I/O is available and can be used in both 3.3
Datu lapa
35Ir noliktavā
Min.: 1
Vair.: 1

Optical Sensor Development Tools
SparkFun Paātrinājuma sensoru izstrādes rīki Triple Axis ACCLRM B/O ADXL335
Datu lapa
46Ir noliktavā
58Paredzamais 08/17/2026
Min.: 1
Vair.: 1

Acceleration Sensor Development Tools
SparkFun Temperatūras sensoru izstrādes rīki IR Thermometer Eval Board MLX90614 5Ir noliktavā
Min.: 1
Vair.: 1

Temperature Sensor Development Tools
SparkFun Paātrinājuma sensoru izstrādes rīki We've been using and selling Analog Devices' ADXL accelerometers for a good while now and now we've found another great part in the series! The ADXL362 is a complete 3-axis MEMS acceleration measurement system that operates at extremely low power co
Datu lapa
39Ir noliktavā
Min.: 1
Vair.: 1

Acceleration Sensor Development Tools
SparkFun Multifunkcionālo sensoru izstrādes rīki RedBot Sensor Line Follower
Datu lapa
50Ir noliktavā
Min.: 1
Vair.: 1

Multiple Function Sensor Development Tools
SparkFun Strāvas sensoru izstrādes rīki The INA169 is a high-side current monitor which means that you place a resistor (a shunt resistor ) on the positive power rail and the INA169 measures the voltage drop across that resistor. The INA169 outputs a small current based on the
Datu lapa
30Ir noliktavā
Min.: 1
Vair.: 1

Current Sensor Development Tools Breakout Boards Current Sensor INA169
SparkFun Skārienjutīgo sensoru izstrādes rīki If you need to add user input without using a button then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1010 is
Datu lapa
48Ir noliktavā
Min.: 1
Vair.: 1

Touch Sensor Development Tools